Logo
Sitemap
Brake Control Valves
 

Air Brake Systems >> Brake Control Valves

Description
Two-Section Brake Valve 100-3514008 is used is Air Brake Systems of trucks, buses, trolleybuses and wheeled tractors.

The Brake Valve is operated mechanically by brake pedal, ensuring fast and controllable admission of compressed air into the brake chambers in each of two circuits, as well as into control chambers of other pneumatic apparatus of the Brake System.

If one of the Brake System's circuits is depressurized, the Brake Valve provides controllable refill of the other circuit with compressed air.

Modification 100-3514008-01/-11/-21/-31 is characterized by possibility to install the Silencer 11.3590070, produced by PJSC PAAZ, and by screen filters availability in feeds 11 and 12. The positions of lever against air inputs and outputs are similar to 100-3514008/-10/-20/-30.

Technical specification
Working pressure, MPa (kgs/cm2), not more than: 0,85 (8,5)
Free lever stroke, mm: 4,7 7,4
Full opening lever stroke, mm: 18,5 27
Total lever stroke, mm: 23,1 39,1
Thread: M22x1,5
Temperature range, °C: from minus 45 to plus 60
Weight, kg: 3,425
Description
Two-Section Foot Brake Valve for Suspended Pedal 11.3514208-01/-11-/21-/31 is used in Air Brake Systems of trucks, buses, trolleybuses and wheeled tractors.

The Brake Valve is operated mechanically by suspended pedal, ensuring that the brake chambers in each of two circuits, as well as control chambers of other pneumatic apparatus of the Brake System, are filled with compressed air following appropriate filling speed and with appropriate tracking.

If one of the Brake System's circuits is depressurized, the Brake Valve provides controllable (with tracking) refill of the other circuit with compressed air. Given modification is compatible with Silencer produced by PJSC PAAZ" and additional filters.

The positions of pedal mechanism against air inputs and outputs are similar to 11.3514208/-10/-20/-30

Technical specification
Working pressure, MPa (kgs/cm2), not more than: 0,85 (8,5)
Free lever stroke, mm: 4,7 7,4
Full opening lever stroke, mm: 18,5 27
Total lever stroke, mm: 23,1 39,1
Thread: M22x1,5
Temperature range, °C: from minus 45 to plus 60
Weight, kg: 3,425
Description
Back Action Hand Brake Valve with Brake Release Device 11.3537310 is used in Air Brake Systems of trucks, buses and wheeled tractors.

Allows performing control check of the truck's parking brake efficiency when holding the whole articulated lorry on a slope with trailer's brakes released.

Operated mechanically by turning the handle and provides controlled compressed-air bleed from the parking brake control bus or from the reserve brake control bus.

Technical specification
Working pressure, MPa (kgs/cm2): no more than 0,8 (8,0)
Connecting threading: 14x1.5
Temperature interval, : minus 45 to plus 60
Weight, kg: 1.2
Description
Reverse Action Hand Brake Valve 100-3537010 is used in Air Brake Systems of trucks, buses, wheeled tractors and other commercial vehicles.

Operated mechanically by turning the handle. Provides controlled compressed-air bleed from the parking brake control bus or from the reserve brake control bus.

Technical specification
Working pressure, MPa (kgs/cm2), not more than: 0,85 (8,5)
Thread: 141,5
Temperature range, : from minus 45 to plus 60
Weight, kg: 0,895


Description
Two-Section Foot Brake Valve 11.3514108 is used in Air Brake Systems of trucks, buses, and wheeled tractors.

The Brake Valve is operated mechanically by pedal, which is to be installed between valve's lugs, ensuring that the brake chambers in each of two circuits, as well as control chambers of other pneumatic apparatus of the Brake System, are filled with compressed air following appropriate filling speed and with appropriate tracking.

If one of the Brake System's circuits is depressurized, the Brake Valve provides controllable (with tracking) refill of the other circuit with compressed air.

Available modifications:
  • 11.3514108/-10/-20/-30. These modifications differ in the positions of pedal mechanism against air inputs and outputs

  • Optionally can be equipped with an outlet port for installing Silencer 11.3590070, produced by PJSC "Poltava Automobile Unit Plant" and with screen filter.
Technical specification
Working pressure, MPa (kgs/cm2): 0,65 0,85 (6,5 8,5)
, mm: 1,9 3,0
Full opening pusher stroke, mm: 8,4 10,8
Total pusher stroke, mm: 12,5 15,7
Thread: 22X1,5
Temperature range, : from minus 45 to plus 60
Weight, kg: 2,70



Description
Two-Section Foot Brake Valve for Suspended Pedal 11.3514208 is used in Air Brake Systems of trucks, buses, trolleybuses and wheeled tractors.

The Brake Valve is operated mechanically by suspended pedal, ensuring that the brake chambers in each of two circuits, as well as control chambers of other pneumatic apparatus of the Brake System, are filled with compressed air following appropriate filling speed and with appropriate tracking.

If one of the Brake System's circuits is depressurized, the Brake Valve provides controllable (with tracking) refill of the other circuit with compressed air.

Available modifications:
  • 11.3514208/-10/-20/-30. These modifications differ in the positions of pedal mechanism against air inputs and outputs

Technical specification
Working pressure, MPa (kgs/cm2): 0,65 0,85 (6,5 8,5)
Free pusher stroke, mm: 1,9 3,0
Full opening pusher stroke, mm: 8,4 10,8
Total pusher stroke, mm: 12,5 15,7
Thread: 22X1,5
Temperature range, : from minus 45 to plus 60
Weight, kg: 2,70



Description
Two-Section Foot Brake Valve for Suspended Pedal 11.3514208-01/-11-/21-/31 is used in Air Brake Systems of trucks, buses, trolleybuses and wheeled tractors.

The Brake Valve is operated mechanically by suspended pedal, ensuring that the brake chambers in each of two circuits, as well as control chambers of other pneumatic apparatus of the Brake System, are filled with compressed air following appropriate filling speed and with appropriate tracking.

If one of the Brake System's circuits is depressurized, the Brake Valve provides controllable (with tracking) refill of the other circuit with compressed air. Given modification is compatible with Silencer produced by PJSC PAAZ" and additional filters.

The positions of pedal mechanism against air inputs and outputs are similar to 11.3514208/-10/-20/-30

Technical specification
Working pressure, MPa (kgs/cm2): 0,65 0,85 (6,5 8,5)
Free pusher stroke, mm: 1,9 3,0
Full opening pusher stroke, mm: 8,4 10,8
Total pusher stroke, mm: 12,5 15,7
Thread: 22X1,5
Temperature range, : from minus 45 to plus 60
Weight, kg: 2,70



Description
Two-Section Foot Brake Valve 11.3514308 is used in Air Brake Systems of trucks, buses, trolleybuses and wheeled tractors.

The Brake Valve is operated mechanically by suspended pedal, ensuring that the brake chambers in each of two circuits, as well as control chambers of other pneumatic apparatus of the Brake System, are filled with compressed air following appropriate filling speed and with appropriate tracking.

If one of the Brake System's circuits is depressurized, the Brake Valve provides controllable (with tracking) refill of the other circuit with compressed air.

Available modifications:
  • 11.3514308/-10/-20/-30. These modifications differ in the positions of pedal mechanism against air inputs and outputs

  • 11.3514308-01/-11/-21/-31. These modifications are compatible with Silencer produced by PJSC "Poltava Automobile Unit Plant" and additional filters.
The positions of pedal mechanism against air inputs and outputs are similar to 11.3514308/-10/-20/-30

Technical specification
Working pressure, MPa (kgs/cm2): 0,65 0,85 (6,5 8,5)
Free pusher stroke, mm: 1,9 3,0
Full opening pusher stroke, mm: 8,4 10,8
Total pusher stroke, mm: 12,5 15,7
Thread: 22X1,5
Temperature range, : from minus 45 to plus 60
Description
Reverse Action Hand Brake Valve 11.3537410/-10 is used in Air Brake Systems of trucks, buses, wheeled tractors and other commercial vehicles.

Operated mechanically by turning the handle. Provides controlled compressed-air bleed from the parking brake control bus or from the reserve brake control bus.

Technical specification
Working pressure, MPa (kgs/cm2): 0,65...0,85 (6,5...8,5)
Maximum through passage section, equivalent to the aperture diameter, mm: 7
Thread, mm:
  for 11.3537410 - 141,5
  for 11.3537410-10 - 161,5
Tightening torque of connecting steel with rubber sealing elements on the screw holes, Nm: 15...25
Working temperature range, : from minus 45 to plus 80
Weight, no more than, kg: 0,73
about news products quality order feedback history fairs contacts